How to Fix HP Error SC1352 (Low on Ink)
📑 In This Guide
Is your HP Envy printer showing error SC1352? You are not alone. The error code SC1352 indicates low on ink, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 3 proven methods to fix HP error SC1352. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 10 minutes.
What Is HP Error SC1352?
Error SC1352 is a common HP printer error that indicates low on ink. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.
When error SC1352 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to one or more ink cartridges are running low on ink. Understanding what triggers this error is the first step toward fixing it.
Error SC1352 can affect various HP Envy models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.
Common Causes of SC1352
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- One or more ink cartridges are running low on ink.
- General printer maintenance needed.
- Normal wear and tear of printer components.
Printer Models Affected by SC1352
SC1352 has been reported on the following HP printer models:
| Printer Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| HP Envy | 3842, 6976 | ⚠️ Sometimes | ✅ Yes |
Support code SC1352 may appear on various HP printer models.
3 Proven Ways to Fix SC1352
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Power Cycle
Easy ⏱ 2 minutes-
1. Turn printer off.
2. Unplug power cord.
3. Wait 60 seconds.
4. Restart printer.
Method 2: Check Low on Ink
Easy ⏱ 5 minutes-
1. Open all printer access doors.
2. Check for any visible issues.
3. Clean if necessary.
4. Close all doors securely.
Method 3: Run Printer Diagnostics
Medium ⏱ 10 minutes-
1. Access printer menu.
2. Select Diagnostics or Tools.
3. Run full diagnostic test.
4. Review results and follow recommendations.
If none of the methods resolve error SC1352, it is time to call HP customer service. Have your printer model and serial number ready.
Frequently Asked Questions (FAQs)
Error SC1352 on HP printers indicates low on ink. This means the printer has detected an issue that prevents normal operation.
Follow the step-by-step methods in this guide. Start with a power cycle, then check the low on ink, and proceed with the remaining fixes in order.
Yes, most HP error SC1352 cases can be resolved at home using the methods in this guide. Professional help is rarely needed.
If the fix is software or connection related, it is free. If a replacement part is needed, costs vary from $15 for cartridges to $150 for hardware repairs.
Hardware defects causing error SC1352 are typically covered under HP's standard warranty. Consumables like ink and toner are not covered.
Conclusion
HP error SC1352 can be frustrating, but as you have seen, there are 3 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error SC1352 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.
Remember: power cycle first, check connections second, and update firmware third. Error SC1352 can be resolved step by step.