HP Printer Error SC0772: 3 Proven Fixes
📑 In This Guide
Is your HP Envy printer showing error SC0772? You are not alone. The error code SC0772 indicates connection lost, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 3 proven methods to fix HP error SC0772. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 19 minutes.
What Is HP Error SC0772?
Error SC0772 is a common HP printer error that indicates connection lost. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.
When error SC0772 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to the wireless connection between the printer and network has been lost. Understanding what triggers this error is the first step toward fixing it.
Error SC0772 can affect various HP Envy models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.
Common Causes of SC0772
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- The wireless connection between the printer and network has been lost.
- Printer usage exceeds recommended service interval.
- Normal wear and tear of printer components.
Printer Models Affected by SC0772
SC0772 has been reported on the following HP printer models:
| Printer Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| HP Envy | 5540, M236 | ⚠️ Sometimes | ✅ Yes |
Support code SC0772 may appear on various HP printer models.
3 Proven Ways to Fix SC0772
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Power Cycle
Easy ⏱ 2 minutes-
1. Turn printer off.
2. Unplug power cord.
3. Wait 60 seconds.
4. Restart printer.
Method 2: Check Connection Lost
Easy ⏱ 5 minutes-
1. Open all printer access doors.
2. Check for any visible issues.
3. Clean if necessary.
4. Close all doors securely.
Method 3: Run Printer Diagnostics
Medium ⏱ 10 minutes-
1. Access printer menu.
2. Select Diagnostics or Tools.
3. Run full diagnostic test.
4. Review results and follow recommendations.
If you have tried all methods above and error SC0772 persists, contact HP support. They can run advanced diagnostics and arrange a repair if needed.
Frequently Asked Questions (FAQs)
Error SC0772 on HP printers indicates connection lost. This means the printer has detected an issue that prevents normal operation.
Follow the step-by-step methods in this guide. Start with a power cycle, then check the connection lost, and proceed with the remaining fixes in order.
Yes, most HP error SC0772 cases can be resolved at home using the methods in this guide. Professional help is rarely needed.
If the fix is software or connection related, it is free. If a replacement part is needed, costs vary from $15 for cartridges to $150 for hardware repairs.
Hardware defects causing error SC0772 are typically covered under HP's standard warranty. Consumables like ink and toner are not covered.
Conclusion
HP error SC0772 can be frustrating, but as you have seen, there are 3 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error SC0772 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.
Remember: power cycle first, check connections second, and update firmware third. Error SC0772 can be resolved step by step.