How to Fix HP Error E6 (Paper Jam in Rear)
📑 In This Guide
Is your HP OfficeJet printer showing error E6? You are not alone. The error code E6 indicates paper jam in rear, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 4 proven methods to fix HP error E6. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 9 minutes.
What Is HP Error E6?
Error E6 is a common HP printer error that indicates paper jam in rear. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.
When error E6 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to paper is jammed in the rear access area. Understanding what triggers this error is the first step toward fixing it.
Error E6 can affect various HP OfficeJet models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.
Common Causes of E6
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- Paper is jammed in the rear access area.
- Dirty or obstructed printer sensors.
- Printer needs calibration.
Printer Models Affected by E6
E6 has been reported on the following HP printer models:
| Printer Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| HP OfficeJet | 5070, 6530, 9055 | ✅ Yes | ✅ Yes |
Error E6 commonly affects OfficeJet printers.
4 Proven Ways to Fix E6
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Power Cycle Your Printer
Easy ⏱ 2 minutes-
1. Turn off the printer.
2. Unplug the power cord.
3. Wait 60 seconds.
4. Plug back in and turn on.
5. Check if error persists.
Method 2: Check for Paper Jam in Rear
Easy ⏱ 5 minutes-
1. Open the printer cover.
2. Check for any obstructions.
3. Remove and reinstall cartridges.
4. Close the cover securely.
5. Try printing a test page.
Method 3: Run HP Print and Scan Doctor
Easy ⏱ 10 minutes-
1. Download HP Print and Scan Doctor from HP Support.
2. Install and run the tool.
3. Select your printer model.
4. Follow the on-screen diagnostics.
5. Apply any recommended fixes.
Method 4: Reset Printer
Medium ⏱ 5 minutes-
1. Go to Setup on the printer control panel.
2. Select Printer Maintenance.
3. Choose Restore Defaults.
4. Confirm the reset.
5. Reconfigure settings after reset.
If none of the methods resolve error E6, it is time to call HP customer service. Have your printer model and serial number ready.
Frequently Asked Questions (FAQs)
HP error E6 means paper jam in rear. Paper is jammed in the rear access area.
Try power cycling first. If that doesn't work, follow the step-by-step methods in this guide.
No, this is a common error that can usually be resolved at home without professional help.
A factory reset often resolves persistent errors, but try the simpler methods first.
Not necessarily. In most cases, it's a minor issue that can be fixed with the steps above.
Conclusion
HP error E6 can be frustrating, but as you have seen, there are 4 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error E6 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.
Error E6 on HP printers is usually fixable at home. Begin with the easiest fix and work your way up.