HP Printer Error E4: 4 Proven Fixes
📑 In This Guide
Is your HP Envy printer showing error E4? You are not alone. The error code E4 indicates low on ink, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 4 proven methods to fix HP error E4. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 12 minutes.
What Is HP Error E4?
Error E4 is a common HP printer error that indicates low on ink. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.
When error E4 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to one or more ink cartridges are running low on ink. Understanding what triggers this error is the first step toward fixing it.
Error E4 can affect various HP Envy models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.
Common Causes of E4
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- One or more ink cartridges are running low on ink.
- Paper path obstruction or debris inside printer.
- Incorrect paper size or type loaded.
Printer Models Affected by E4
E4 has been reported on the following HP printer models:
| Printer Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| HP Envy | 2752, 6815, 3200 | ✅ Yes | ✅ Yes |
Error E4 commonly affects Envy printers.
4 Proven Ways to Fix E4
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Power Cycle Your Printer
Easy ⏱ 2 minutes-
1. Turn off the printer.
2. Unplug the power cord.
3. Wait 60 seconds.
4. Plug back in and turn on.
5. Check if error persists.
Method 2: Check for Low on Ink
Easy ⏱ 5 minutes-
1. Open the printer cover.
2. Check for any obstructions.
3. Remove any jammed paper carefully.
4. Close the cover securely.
5. Try printing a test page.
Method 3: Run HP Print and Scan Doctor
Easy ⏱ 10 minutes-
1. Download HP Print and Scan Doctor from HP Support.
2. Install and run the tool.
3. Select your printer model.
4. Follow the on-screen diagnostics.
5. Apply any recommended fixes.
Method 4: Reset Printer
Medium ⏱ 5 minutes-
1. Go to Setup on the printer control panel.
2. Select Printer Maintenance.
3. Choose Restore Defaults.
4. Confirm the reset.
5. Reconfigure settings after reset.
If you have tried all methods above and error E4 persists, contact HP support. They can run advanced diagnostics and arrange a repair if needed.
Frequently Asked Questions (FAQs)
HP error E4 means low on ink. One or more ink cartridges are running low on ink.
Try power cycling first. If that doesn't work, follow the step-by-step methods in this guide.
No, this is a common error that can usually be resolved at home without professional help.
A factory reset often resolves persistent errors, but try the simpler methods first.
Not necessarily. In most cases, it's a minor issue that can be fixed with the steps above.
Conclusion
HP error E4 can be frustrating, but as you have seen, there are 4 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error E4 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.
Start with a power cycle for HP error E4. If that fails, check your cartridges and clean the contacts.