How to Fix HP Error 59.8 (USB Not Recognized)
📑 In This Guide
Is your HP Envy printer showing error 59.8? You are not alone. The error code 59.8 indicates usb not recognized, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.
In this comprehensive guide, we will walk you through 4 proven methods to fix HP error 59.8. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 15 minutes.
What Is HP Error 59.8?
Error 59.8 is a common HP printer error that indicates usb not recognized. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.
When error 59.8 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to the computer cannot recognize the printer connected via usb. Understanding what triggers this error is the first step toward fixing it.
Error 59.8 can affect various HP Envy models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.
Common Causes of 59.8
This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.
- The computer cannot recognize the printer connected via USB.
- Software or driver conflict.
Printer Models Affected by 59.8
59.8 has been reported on the following HP printer models:
| Printer Series | Models | Common? | Easy Fix? |
|---|---|---|---|
| HP Envy | 2750, M405, 3836 | ⚠️ Sometimes | ✅ Yes |
Error 59.8 appears across multiple HP printer series.
4 Proven Ways to Fix 59.8
Try these methods in order. Start with the easiest and most common solutions first.
Method 1: Power Cycle
Easy ⏱ 2 minutes-
1. Turn printer off.
2. Unplug from power.
3. Wait 60 seconds.
4. Plug in and restart.
Method 2: Inspect and Fix USB Not Recognized
Easy ⏱ 5 minutes-
1. Open printer access areas.
2. Check cartridges.
3. Clean any visible issues.
4. Close all doors and try again.
Method 3: Update Drivers and Firmware
Medium ⏱ 10 minutes-
1. Visit HP Support website.
2. Enter your printer model.
3. Download latest drivers.
4. Install and restart.
Method 4: Factory Reset
Medium ⏱ 5 minutes-
1. Navigate to Setup menu.
2. Select Factory Reset.
3. Confirm and wait for restart.
Contact HP support if the error 59.8 continues after all troubleshooting steps. Your printer may require professional service or part replacement.
Frequently Asked Questions (FAQs)
HP error 59.8 relates to usb not recognized. The computer cannot recognize the printer connected via USB.
Follow the step-by-step methods in this guide starting with power cycling.
Check your warranty status. Hardware errors are typically covered.
Most cases are resolved within 15-20 minutes using the methods above.
Not usually. Most users can fix this at home.
Conclusion
HP error 59.8 can be frustrating, but as you have seen, there are 4 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.
If you have tried all the methods above and the error 59.8 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.
Start with a power cycle for HP error 59.8. If that fails, check your cartridges and clean the contacts.