How to Fix HP Error 50.35 (Paper Jam Duplex)

Is your HP LaserJet printer showing error 50.35? You are not alone. The error code 50.35 indicates paper jam duplex, and it affects thousands of HP printer users worldwide. The good news is that this error is usually fixable at home without calling a technician.

In this comprehensive guide, we will walk you through 4 proven methods to fix HP error 50.35. We have organized these fixes from the simplest to the most advanced, so you can start with the easiest solution first. Most users can resolve this error in under 29 minutes.

What Is HP Error 50.35?

Error 50.35 is a common HP printer error that indicates paper jam duplex. This error can appear on your printer's control panel display or as a pop-up message on your computer screen when you try to print.

When error 50.35 occurs, your printer may stop printing, flash warning lights, or display the error code. The root cause is typically related to paper is jammed in the duplex (two-sided printing) path. Understanding what triggers this error is the first step toward fixing it.

Error 50.35 can affect various HP LaserJet models, both older and newer versions. If you are experiencing this error, do not worry — we have compiled all the necessary troubleshooting steps below to help you get your printer back to正常工作.

Common Causes of 50.35

This error can be triggered by several factors. Understanding the root cause helps you choose the right fix.

• Paper is jammed in the duplex (two-sided printing) path.
• Software or driver conflict.

Printer Models Affected by 50.35

50.35 has been reported on the following HP printer models:

Error 50.35 appears across multiple HP printer series.

4 Proven Ways to Fix 50.35

Try these methods in order. Start with the easiest and most common solutions first.

Method 1: Power Cycle

Easy ⏱ 2 minutes

1. Turn printer off. 2. Unplug from power. 3. Wait 60 seconds. 4. Plug in and restart.

💡 Pro Tip: First step for any printer error.

Method 2: Inspect and Fix Paper Jam Duplex

Easy ⏱ 5 minutes

1. Open printer access areas. 2. Check cartridges. 3. Clean any visible issues. 4. Close all doors and try again.

💡 Pro Tip: Check for visible obstructions or loose connections.

Method 3: Update Drivers and Firmware

Medium ⏱ 10 minutes

1. Visit HP Support website. 2. Enter your printer model. 3. Download latest drivers. 4. Install and restart.

💡 Pro Tip: Always download drivers from the official HP website only.

Method 4: Factory Reset

Medium ⏱ 5 minutes

1. Navigate to Setup menu. 2. Select Factory Reset. 3. Confirm and wait for restart.

💡 Pro Tip: Backup your network settings before resetting.

Frequently Asked Questions (FAQs)

Conclusion

HP error 50.35 can be frustrating, but as you have seen, there are 4 effective ways to resolve it. In most cases, starting with a simple power cycle or checking your cartridges will solve the problem quickly.

If you have tried all the methods above and the error 50.35 persists, it may be time to contact HP support for professional assistance. Remember to keep your printer's firmware updated and use genuine supplies to prevent future errors.